Arched garden door

February 28, 2015

astriddegroot

A semi-headed frame cut out in three lengths and bolted together with hammer- head tenons and shoulder tongues.   astriddegroot

astriddegroot

astriddegroot

astriddegroot Make a template with router and circular-jig. astriddegroot I screwed the template to the wood and start routing the semi-headed shape. astriddegroot

astriddegroot Laminate the rebate. astriddegroot Check on straight level. astriddegroot

astriddegroot Gluing the head of the door. astriddegroot Made another template left the jig in the same setting just moved the router closer I wanted 3mm space between frame and door. astriddegroot Layout of the door, put together not glued yet. astriddegroot Made this jig to hold the slats firmly for when I drill the mortice. astriddegroot And a mortice in the semi- rounded top of the door was a bit tricky to get them all exact. astriddegroot Check the fit. astriddegroot All glued now,  glued the door first, than gluing the frame around the door in the exact position. astriddegroot With the 3mm space between door and frame. astriddegroot Fitted in its place, the entrance to a beautiful walled garden. astriddegroot astriddegroot

One Response to “Arched garden door”


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: